Select Language


Communiting Mill

Features of Communiting Mill:Communiting Mill - Plain and Water Jacketed Type

  • GMP point of view, Communiting Mill is provided with SS cladding on base, belt guards and cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated.
  • Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator.
  • Swing type beaters assembly is provided as a standard supply, which increases the output by 10 to 30% and is easy to clean.
  • Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splined shaft.
  • Transmission of heat to the chamber from the bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
  • Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life.
  • Castors are provided for mobility and brakes can be applied for fixing machine at one place.
  • Communiting mill is available in plain & water jacketed type, the most suitable for pharmaceutical industry. Flameproof electricals can be provided on demand at extra cost.

Technical Specifications of Communiting Mill:

Model TPC-CM
Rotor Speed
1000-2250-4500 rpm
Swinging type with knife and impact edge
Screens 1. Round hole perforated stainless steel sheet
Electric motor
7.5 hp., 1440 RPM, 440 V., 50 Hz., 3 Phase
Overall Dimensions (mm)
69 (L) X 127 (W) X 170 cm (H)
Net Weight (kgs) (Approx) 310
Output (kg / hour)
25 to 300 (Varies according to product, rotor speed & screen)

* Depending upon the tooling size, shape and material characteristics
  Note: We reserve right to change specifications without any prior notice.